[VIC20]
JAMAction=1 ### Set action on CPU JAM: (0: Ask, 1: continue, 2: Monitor, 3: Reset, 4: Hard Reset, 5: Quit Emulator)
Speed=100 ### Limit emulation speed to specified value
InitialWarpMode=0 ### No description
KeymapUserSymFile="" ### Specify name of symbolic keymap file
KeymapUserPosFile="" ### Specify name of positional keymap file
KeyboardMapping=0 ### Specify host keyboard layout
KeyboardType=0 ### Specify emulated keyboard type
VirtualDevice1=0 ### Enable general mechanisms for fast disk/tape emulation
VirtualDevice2=0 ### Enable general mechanisms for fast disk/tape emulation
VirtualDevice4=0 ### Enable general mechanisms for fast disk/tape emulation
VirtualDevice5=0 ### Enable general mechanisms for fast disk/tape emulation
VirtualDevice6=0 ### Enable general mechanisms for fast disk/tape emulation
VirtualDevice7=0 ### Enable general mechanisms for fast disk/tape emulation
VirtualDevice8=0 ### Enable general mechanisms for fast disk/tape emulation
VirtualDevice9=0 ### Enable general mechanisms for fast disk/tape emulation
VirtualDevice10=0 ### Enable general mechanisms for fast disk/tape emulation
VirtualDevice11=0 ### Enable general mechanisms for fast disk/tape emulation
ChargenName="chargen-901460-03.bin" ### Specify name of character generator ROM image
KernalName="kernal.901486-07.bin" ### Specify name of Kernal ROM image
BasicName="basic-901486-01.bin" ### Specify name of BASIC ROM image
VFLImod=0 ### Enable VFLI modification.
VICVideoCache=0 ### Enable the video cache
VICPALScanLineShade=750 ### Amount of scan line shading for the CRT emulation
VICPALBlur=500 ### Amount of horizontal blur for the CRT emulation.
VICPALDelaylineType=0 ### Set type of delay line used in the CRT (0: normal, 1: U only (1084 style)).
VICShowStatusbar=0 ### Show status bar
SidResidEnableRawOutput=0 ### Enable writing raw reSID output to resid.raw, 16bit little endian data (WARNING: 1MiB per second).
SidFilters=1 ### Emulate SID filters
SidCart=0 ### Enable the SID cartridge
SidAddress=38912 ### SID cartridge address (0x9800/0x9C00)
SidClock=1 ### SID cartridge clock (0: C64 clock, 1: VIC20 clock)
UserportDevice=0 ### Set userport device (0: None, 1: Userport printer, 2: Userport RS232/Modem, 3: CGA userport joy adapter, 4: PET userport joy adapter, 5: Hummer userport joy adapter, 6: OEM userport joy adapter, 10: Synergy userport joy adapter, 11: Userport DAC, 15: Userport RTC (RTC58321A), 16: Userport RTC (DS1307), 17: Userport Petscii SNES pad, 21: Userport I/O Simulation, 23: Joystick Adapter (Spaceballs), 24: Userport Stupid Pet Tricks joystick adapter)
RsUserUP9600=0 ### Enable UP9600 interface emulation.
RsUserBaud=2400 ### Set the baud rate of the RS232 userport emulation.
RsUserDev=0 ### Specify VICE RS232 device for userport
RsUserRTSInv=0 ### Invert RS232 userport emulation RTS line
RsUserCTSInv=0 ### Invert RS232 userport emulation CTS line
RsUserDSRInv=0 ### Invert RS232 userport emulation DSR line
RsUserDCDInv=0 ### Invert RS232 userport emulation DCD line
RsUserDTRInv=0 ### Invert RS232 userport emulation DTR line
PrinterTextDevice1="vice_printer.txt" ### Specify name of printer text device or dump file
PrinterTextDevice2="LPT1:" ### Specify name of printer text device or dump file
PrinterTextDevice3="LPT2:" ### Specify name of printer text device or dump file
PrinterUserportTextDevice=0 ### Specify printer text output device for userport printer
Printer4TextDevice=0 ### Specify printer text output device for printer #4
Printer5TextDevice=0 ### Specify printer text output device for printer #5
Printer6TextDevice=0 ### Specify printer text output device for printer #6
Printer4Output="text" ### Specify name of output device for device #4. (graphics, text)
Printer5Output="text" ### Specify name of output device for device #5. (graphics, text)
Printer6Output="text" ### Specify name of output device for device #6. (graphics, text)
Printer4Driver="ascii" ### Specify name of printer driver for device #4. (ascii/mps803/nl10/raw)
Printer5Driver="ascii" ### Specify name of printer driver for device #5. (ascii/mps803/nl10/raw)
Printer6Driver="raw" ### Specify name of printer driver for device #6. (1520/raw)
Printer4=0 ### Set device type for device #4 (0: None, 1: Filesystem, 2: Real)
Printer5=0 ### Set device type for device #5 (0: None, 1: Filesystem, 2: Real)
Printer6=0 ### Set device type for device #6 (0: None, 1: Filesystem, 2: Real)
Printer7=0 ### Set device type for device #7 (0: None, 2: Real)
PrinterUserportDriver="ascii" ### Specify name of printer driver for the userport printer. (ascii/nl10/raw)
PrinterUserportOutput="text" ### Specify name of output device for the userport printer. (graphics, text)
BBRTCSave=0 ### Enable saving of the BBRTC data when changed.
JoyOpposite=0 ### Enable opposite joystick directions
JoyStick1AutoFire=0 ### Enable autofire for joystick/joypad in native joystick port
JoyStick1AutoFireMode=0 ### Set autofire mode for joystick/joypad in native joystick port (0: Autofire when fire button is pressed, 1: Permanently autofire (pressing fire overrides autofire)
JoyStick1AutoFireSpeed=10 ### Set autofire speed for joystick/joypad in native joystick port (amount of fire button presses per second)
JoyStick3AutoFire=0 ### Enable autofire for joystick/joypad in joystick adapter port 1
JoyStick3AutoFireMode=0 ### Set autofire mode for joystick/joypad in joystick adapter port 1 (0: Autofire when fire button is pressed, 1: Permanently autofire (pressing fire overrides autofire)
JoyStick3AutoFireSpeed=10 ### Set autofire speed for joystick/joypad in joystick adapter port 1 (amount of fire button presses per second)
JoyStick4AutoFire=0 ### Enable autofire for joystick/joypad in joystick adapter port 2
JoyStick4AutoFireMode=0 ### Set autofire mode for joystick/joypad in joystick adapter port 2 (0: Autofire when fire button is pressed, 1: Permanently autofire (pressing fire overrides autofire)
JoyStick4AutoFireSpeed=10 ### Set autofire speed for joystick/joypad in joystick adapter port 2 (amount of fire button presses per second)
JoyStick5AutoFire=0 ### Enable autofire for joystick/joypad in joystick adapter port 3
JoyStick5AutoFireMode=0 ### Set autofire mode for joystick/joypad in joystick adapter port 3 (0: Autofire when fire button is pressed, 1: Permanently autofire (pressing fire overrides autofire)
JoyStick5AutoFireSpeed=10 ### Set autofire speed for joystick/joypad in joystick adapter port 3 (amount of fire button presses per second)
JoyStick6AutoFire=0 ### Enable autofire for joystick/joypad in joystick adapter port 4
JoyStick6AutoFireMode=0 ### Set autofire mode for joystick/joypad in joystick adapter port 4 (0: Autofire when fire button is pressed, 1: Permanently autofire (pressing fire overrides autofire)
JoyStick6AutoFireSpeed=10 ### Set autofire speed for joystick/joypad in joystick adapter port 4 (amount of fire button presses per second)
JoyStick7AutoFire=0 ### Enable autofire for joystick/joypad in joystick adapter port 5
JoyStick7AutoFireMode=0 ### Set autofire mode for joystick/joypad in joystick adapter port 5 (0: Autofire when fire button is pressed, 1: Permanently autofire (pressing fire overrides autofire)
JoyStick7AutoFireSpeed=10 ### Set autofire speed for joystick/joypad in joystick adapter port 5 (amount of fire button presses per second)
JoyStick8AutoFire=0 ### Enable autofire for joystick/joypad in joystick adapter port 6
JoyStick8AutoFireMode=0 ### Set autofire mode for joystick/joypad in joystick adapter port 6 (0: Autofire when fire button is pressed, 1: Permanently autofire (pressing fire overrides autofire)
JoyStick8AutoFireSpeed=10 ### Set autofire speed for joystick/joypad in joystick adapter port 6 (amount of fire button presses per second)
JoyStick9AutoFire=0 ### Enable autofire for joystick/joypad in joystick adapter port 7
JoyStick9AutoFireMode=0 ### Set autofire mode for joystick/joypad in joystick adapter port 7 (0: Autofire when fire button is pressed, 1: Permanently autofire (pressing fire overrides autofire)
JoyStick9AutoFireSpeed=10 ### Set autofire speed for joystick/joypad in joystick adapter port 7 (amount of fire button presses per second)
JoyStick10AutoFire=0 ### Enable autofire for joystick/joypad in joystick adapter port 8
JoyStick10AutoFireMode=0 ### Set autofire mode for joystick/joypad in joystick adapter port 8 (0: Autofire when fire button is pressed, 1: Permanently autofire (pressing fire overrides autofire)
JoyStick10AutoFireSpeed=10 ### Set autofire speed for joystick/joypad in joystick adapter port 8 (amount of fire button presses per second)
FliplistName="B:\Consoles\Emulators\RetroArch-Win64\system\vice/fliplist-VIC20.vfl" ### Specify name of the flip list file image
AttachDevice8d0Readonly=0 ### Attach disk image for drive #8:0 read only
AttachDevice9d0Readonly=0 ### Attach disk image for drive #9:0 read only
AttachDevice10d0Readonly=0 ### Attach disk image for drive #10:0 read only
AttachDevice11d0Readonly=0 ### Attach disk image for drive #11:0 read only
AttachDevice8d1Readonly=0 ### Attach disk image for drive #8:1 read only
AttachDevice9d1Readonly=0 ### Attach disk image for drive #9:1 read only
AttachDevice10d1Readonly=0 ### Attach disk image for drive #10:1 read only
AttachDevice11d1Readonly=0 ### Attach disk image for drive #11:1 read only
FileSystemDevice8=1 ### Set device type for device #8 (0: None, 1: Filesystem, 2: OpenCBM)
FileSystemDevice9=1 ### Set device type for device #9 (0: None, 1: Filesystem, 2: OpenCBM)
FileSystemDevice10=1 ### Set device type for device #10 (0: None, 1: Filesystem, 2: OpenCBM)
FileSystemDevice11=1 ### Set device type for device #11 (0: None, 1: Filesystem, 2: OpenCBM)
FSDevice8Dir="." ### No description
FSDevice9Dir="." ### No description
FSDevice10Dir="." ### No description
FSDevice11Dir="." ### No description
FSDevice8ConvertP00=1 ### Enable on-read support for P00 files on drive 8
FSDevice9ConvertP00=1 ### Enable on-read support for P00 files on drive 9
FSDevice10ConvertP00=1 ### Enable on-read support for P00 files on drive 10
FSDevice11ConvertP00=1 ### Enable on-read support for P00 files on drive 11
FSDevice8SaveP00=0 ### Enable saving of P00 files on drive 8
FSDevice9SaveP00=0 ### Enable saving of P00 files on drive 9
FSDevice10SaveP00=0 ### Enable saving of P00 files on drive 10
FSDevice11SaveP00=0 ### Enable saving of P00 files on drive 11
FSDevice8HideCBMFiles=0 ### Hide CBM files (only show P00 files) for drive 8
FSDevice9HideCBMFiles=0 ### Hide CBM files (only show P00 files) for drive 9
FSDevice10HideCBMFiles=0 ### Hide CBM files (only show P00 files) for drive 10
FSDevice11HideCBMFiles=0 ### Hide CBM files (only show P00 files) for drive 11
FSDeviceLongNames=0 ### Allow filenames longer than 16 characters
FSDeviceOverwrite=0 ### Overwrite files without using SAVE"@0:name"
KbdbufDelay=0 ### Set additional keyboard buffer delay (0: use default)
AutostartPrgDiskImage="B:\Consoles\Emulators\RetroArch-Win64\system\vice/autostart-VIC20.d64" ### Set disk image for autostart of PRG files
AutostartBasicLoad=1 ### On autostart from disk, load to BASIC start (without ',1')
AutostartTapeBasicLoad=1 ### On autostart from tape, load to BASIC start (without ',1')
AutostartRunWithColon=1 ### On autostart, use the 'RUN' command with a colon, i.e., 'RUN:'
AutostartHandleTrueDriveEmulation=0 ### Handle True Drive Emulation on autostart
AutostartDelay=0 ### Set initial autostart delay (0: use default)
SmartMouseRTCSave=0 ### Enable saving of smart mouse RTC data when changed.
TapePort1Device=1 ### No description
DatasetteResetWithCPU=1 ### No description
DatasetteZeroGapDelay=20000 ### No description
DatasetteSpeedTuning=1 ### No description
DatasetteTapeWobbleFrequency=1000 ### No description
DatasetteTapeWobbleAmplitude=1000 ### No description
DatasetteTapeAzimuthError=0 ### No description
DatasetteSound=0 ### No description
DatasetteSoundVolume=1024 ### No description
CPClockF83Save=0 ### No description
CartridgeType=-1 ### No description
CartridgeReset=1 ### No description
CartridgeFile="" ### No description
GenericCartridgeFile2000="" ### No description
GenericCartridgeFile4000="" ### No description
GenericCartridgeFile6000="" ### No description
GenericCartridgeFileA000="" ### No description
GenericCartridgeFileB000="" ### No description
FinalExpansionWriteBack=0 ### No description
VicFlashPluginWriteBack=0 ### No description
UltiMemWriteBack=0 ### No description
MegaCartNvRAMfilename="" ### No description
MegaCartNvRAMWriteBack=0 ### No description
DIGIMAX=0 ### No description
DIGIMAXbase=38912 ### No description
DS12C887RTC=0 ### No description
DS12C887RTCbase=38912 ### No description
DS12C887RTCRunMode=1 ### No description
DS12C887RTCSave=0 ### No description
SFXSoundExpanderIOSwap=0 ### No description
SFXSoundSamplerIOSwap=0 ### No description
SFXSoundSampler=0 ### No description
IO2RAM=0 ### No description
IO3RAM=0 ### No description
GEORAMfilename="" ### No description
GEORAMIOSwap=0 ### No description
GEORAMsize=512 ### No description
GEORAMImageWrite=0 ### No description
GEORAM=0 ### No description
IEEE488=0 ### No description
UserportRTC58321aSave=0 ### No description
UserportRTCDS1307Save=0 ### No description
IOCollisionHandling=0 ### No description
Drive8RTCSave=0 ### Enable saving of FD2000/4000 RTC data when changed.
Drive8ExtendImagePolicy=1 ### Set drive 40 track extension policy (0: never, 1: ask, 2: on access)
Drive8IdleMethod=0 ### Set drive idling method (0: no traps, 1: skip cycles, 2: trap idle)
Drive8RPM=30000 ### Set drive rpm (30000 = 300rpm)
Drive8WobbleFrequency=5000 ### Set drive wobble frequency
Drive8WobbleAmplitude=2000 ### Set drive wobble amplitude
Drive8TrueEmulation=1 ### Enable hardware-level emulation of disk drive
Drive9RTCSave=0 ### Enable saving of FD2000/4000 RTC data when changed.
Drive9ExtendImagePolicy=1 ### Set drive 40 track extension policy (0: never, 1: ask, 2: on access)
Drive9IdleMethod=0 ### Set drive idling method (0: no traps, 1: skip cycles, 2: trap idle)
Drive9RPM=30000 ### Set drive rpm (30000 = 300rpm)
Drive9WobbleFrequency=5000 ### Set drive wobble frequency
Drive9WobbleAmplitude=2000 ### Set drive wobble amplitude
Drive9TrueEmulation=1 ### Enable hardware-level emulation of disk drive
Drive10RTCSave=0 ### Enable saving of FD2000/4000 RTC data when changed.
Drive10ExtendImagePolicy=1 ### Set drive 40 track extension policy (0: never, 1: ask, 2: on access)
Drive10IdleMethod=0 ### Set drive idling method (0: no traps, 1: skip cycles, 2: trap idle)
Drive10RPM=30000 ### Set drive rpm (30000 = 300rpm)
Drive10WobbleFrequency=5000 ### Set drive wobble frequency
Drive10WobbleAmplitude=2000 ### Set drive wobble amplitude
Drive10TrueEmulation=1 ### Enable hardware-level emulation of disk drive
Drive11RTCSave=0 ### Enable saving of FD2000/4000 RTC data when changed.
Drive11ExtendImagePolicy=1 ### No description
Drive11IdleMethod=0 ### No description
Drive11RPM=30000 ### No description
Drive11WobbleFrequency=5000 ### No description
Drive11WobbleAmplitude=2000 ### No description
Drive11TrueEmulation=1 ### No description
Drive9Type=0 ### Set drive type (0: no drive, 1540: CBM 1540, 1541: CBM 1541, 1542: CBM 1541-II, 1570: CBM 1570, 1571: CBM 1571, 1581: CBM 1581, 2000: CMD FD-2000, 4000: CMD FD-4000, 4844: CMD HD, 2031: CBM 2031, 2040: CBM 2040, 3040: CBM 3040, 4040: CBM 4040, 1001: CBM 1001, 8050: CBM 8050, 8250: CBM 8250, 9000: CBM D9090/D9060)
Drive10Type=0 ### Set drive type (0: no drive, 1540: CBM 1540, 1541: CBM 1541, 1542: CBM 1541-II, 1570: CBM 1570, 1571: CBM 1571, 1581: CBM 1581, 2000: CMD FD-2000, 4000: CMD FD-4000, 4844: CMD HD, 2031: CBM 2031, 2040: CBM 2040, 3040: CBM 3040, 4040: CBM 4040, 1001: CBM 1001, 8050: CBM 8050, 8250: CBM 8250, 9000: CBM D9090/D9060)
Drive11Type=0 ### No description
Drive8RAM2000=0 ### No description
Drive8RAM4000=0 ### No description
Drive8RAM6000=0 ### No description
Drive8RAM8000=0 ### No description
Drive8RAMA000=0 ### No description
Drive8FixedSize="8G" ### No description
Drive9RAM2000=0 ### No description
Drive9RAM4000=0 ### No description
Drive9RAM6000=0 ### No description
Drive9RAM8000=0 ### No description
Drive9RAMA000=0 ### No description
Drive9FixedSize="8G" ### No description
Drive10RAM2000=0 ### No description
Drive10RAM4000=0 ### No description
Drive10RAM6000=0 ### No description
Drive10RAM8000=0 ### No description
Drive10RAMA000=0 ### No description
Drive10FixedSize="8G" ### No description
Drive11RAM2000=0 ### No description
Drive11RAM4000=0 ### No description
Drive11RAM6000=0 ### No description
Drive11RAM8000=0 ### No description
Drive11RAMA000=0 ### No description
Drive11FixedSize="8G" ### No description
DosName1540="dos1540-325302+3-01.bin" ### No description
DosName1541="dos1541-325302-01+901229-05.bin" ### No description
DosName1541ii="dos1541ii-251968-03.bin" ### No description
DosName1570="dos1570-315090-01.bin" ### No description
DosName1571="dos1571-310654-05.bin" ### No description
DosName1581="dos1581-318045-02.bin" ### No description
DosName2000="dos2000-cs-33cc6f.bin" ### No description
DosName4000="dos4000-fd-350022.bin" ### No description
DosNameCMDHD="bootromCMDHD-v2-80.bin" ### No description
DosName2031="dos2031-901484-03+05.bin" ### No description
DosName2040="dos2040-901468-06+07.bin" ### No description
DosName3040="dos3040-901468-11-13.bin" ### No description
DosName4040="dos4040-901468-14-16.bin" ### No description
DosName1001="dos1001-901887+8-01.bin" ### No description
DosName9000="dos9000-300516+7-revC.bin" ### No description
RAMInitValueOffset=2 ### No description
RAMInitStartValue=0 ### No description
RAMInitValueInvert=4 ### No description
RAMInitPatternInvert=16384 ### No description
RAMInitPatternInvertValue=255 ### No description
RAMInitStartRandom=0 ### No description
RAMInitRepeatRandom=0 ### No description
RAMInitRandomChance=1 ### No description