		Sega Master system light gun/Phaser 3050
		 (Adaptator to do Actionware's phaser)
		----------------------------------------

Needed:
- 1 sub-d 9 pins (Female)
- 1 sub-d 9 pins (Male)
- 1 10K Ohm resitor
- 1 short 9 wires cable
- A Sega Master system light gun 3050 (or compatible)

To Amiga Joystick Port 2		To Sega phaser 3050
   (sub-d9 female)			   (sub-d9 male)
------------------------		-------------------
Pin					Pin
 5 (Trigger)		<--------------> 6 <---|
 6 (LP Signal/HitSense)	<--------------> 7     | 10 K Ohm resistor
 7 (+5V)		<--------------> 5 <---|
 8 (Ground)		<--------------> 8

Remark:
The 10K Ohm resistor can be also plugged between pins 5 & 7 of the amiga port 2

Thanks to Damon_Sisk for this ;)
