E N E M Y - Tempest Of Violence
Additional information for Amiga users.
(C) 1997 by Anachronia
Last update: 27.9.1997 - Enemy V1.04



PROGRAM-PARAMETERS
------------------

You can change the startup-sequence of the Enemy disk A
through append of parameters. Normally this is not required.
The following parameters are possible:

pal   : Makes a PAL-screen (picture centred).
ntsc  : Makes a NTSC-screen.
nofx  : Loads no music and no soundeffects.
noce  : No copper-coloreffects.
disp  : The system-display will be on.
blnk  : Shows decrunching by flashing.
wfi   : Shows before every load a list with the needed files.
wary  : programm is wary. You can use ist, if there are problems.
cach  : Lets the CPU-Caches ON! Normally these will deaktivated
	by the program, because Amigas with fast processors
        (e.g. 68060) does not running fine else.
ints  : Lets the Blitter- and CopperInterrupts ON.
        Normally these will be deaktivated, because they are
        not needed.
noin  : Does not copy the files really while the installation
        to harddisk.
lowm  : Renounced to load many soundeffects so that you have
        20 KByte more RAM memory. You can use it, if there
        are low-memory errors requested.
hzXX  : Define the frequency of your monitor
        (XX = Frames per second).


For Example:

EF/Enemy >nil: pal hz90

In this case you should have a pal-Amiga and a monitor
with a frequency of 90 herz.

For the intro (EnIntro) you can use the parameters
pal, ntsc and cach.

Important: by installing to harddisk the parameters
goes lost, because the startup-sequence will be renewed.


INSTALLATION TO HARDDISK
------------------------

INSTALLATION WITH THE ENEMY-INSTALLATION-ROUTINE

Errors while the installation:

210: DIRECTORY NAME INVALID (for example: only "dh0:")
213: DISK NOT VALIDATED.
214: DISK IS WRITE-PROTECTED.
218: DEVICE IS NOT MOUNTED.
221: DISK IS FULL.
225: NOT A VALID DOS DISK.
226: NO DISK IN DRIVE.


INSTALLATION FROM DOS


1) Create on your harddisk a target-directory. For example:

   > MakeDir DH0:ENEMY

2) Copy from disk A the directories 'EF' and 'ENIF' into
   your target-directory.

   > Copy ENEMY_A:EF DH0:ENEMY/
   > Copy ENEMY_A:ENIF DH0:ENEMY/

3) Copy from disk B the directory 'EF' into the already
   exist directory EF on your harddisk.

   > Copy ENEMY_B:EF DH0:ENEMY/

4) Rename the directories 'EF' and 'ENIF' on your harddisk
   to 'E' and 'ENI'.

   > Rename DH0:ENEMY/EF DH0:ENEMY/E
   > Rename DH0:ENEMY/ENIF DH0:ENEMY/ENI

5) Make your Enemy target-directory to the actual directory.
   Type "Enintro" to start the intro and "Enemy" to start
   the mainprogram.

   > CD DH0:ENEMY
   > ENI/Enintro
   > E/Enemy




QUESTIONS
---------

If you have questions to this game, you can send a fax or
a letter to ANACHRONIA.
If your disks have a read-error, please send it to us.


Contact address:

ANACHRONIA
Schlosserstr. 2
CH-9000 St. Gallen
Switzerland


FACSIMILE (DON'T CALL US PLEASE!):

+41 / 71 277 11 75


E-MAIL:

MANKOH@BLUEWIN.CH



PROGRAM DOES NOT WORKING FINE?
------------------------------

If the game does not working fine, but there is no read-error,
please inform us with following details:

1. Your Amiga type (A500, A1200, A2000b ...).
2. How much RAM memory and which pheriphery do you have?
3. Which processor, graphic-card, turbo-boards do you use?
4. What is the problem?


NOT ENOUGH RAM MEMORY?

1. Deactivate as many as possible pheriphery, because these
   things needs memory.

2. Use the parameter 'lowm'. Not all sound-effects will be
   loaded then.


READ-ERROR?

If the Disk B has a read-error, so you can try it to repair
with the disk-doctor.
Note: The files in the directories TXT, SEK and FX are once
more on disk A in directory RESERVE.


